Repetier-host V2.0.0

Repetier-host V2.0.0

Příspěvekod juliusvla » 29.04.2017 18:40

Ahoj všem,
rád bych se zeptal zda někdo máte zkušenost s novým Repetierem V2.0. Je graficky pozměněn, obsahuje Slicr Průša a další věci. Moc jsem to zatím neprocházel a tak bych se rád zeptal na vaše zkušenosti než se rozhodnu na něj přejít. Předem děkuji za všechny info.
  • 0

juliusvla
 
Příspěvky: 46
Registrován: 10.11.2016 23:42
Bydliště: Plzeň
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod MartinCZ » 04.05.2017 07:45

Já ho mám hned jak na mě vyskočila aktualizace a nemám s ním problém. Jen si zvyknout na jiný ikonky a tlačítka. Nastavení a tiskový profily mi zůstaly a používám Cura Engine, Slic3r i PrůšaSlic3r (používa nastavení Slic3ru) a vše OK. Asi to nevyužívám tak moc, abych si všimnul nějaké změny, jen včera jsem našel u změny modelu i možnost uložit stl, ale nejsem si jistý, jestli to nebylo i na starší verzi.
  • 0

MartinCZ
 
Příspěvky: 19
Registrován: 20.10.2016 11:52
Bydliště: Kolínsko
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod Gaspadlo » 05.05.2017 11:09

Stejně jako MartinCZ - nezaznamenal jsem žádné větší změny, které by ovlivnily mou "User Experience".
Používám CuraEngine, celkové ovládání Repetier-Host mi přijde stále přehledné a intuitivní.
  • 0

Thingiverse - Gaspadlo
SW: Repetier-Host | CuraEngine |SketchUp Make 2017 | MeshLab | MS 3D Builder | SculptGL
Tiskárna: DMS DP2 - 2000cc, 1.75mm PLA, 0.4mm nozzle
Gaspadlo
 
Příspěvky: 9
Registrován: 03.05.2017 09:48
Bydliště: Pardubice
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod juliusvla » 05.05.2017 17:47

Děkuji, to jsem potřeboval vědět. Půjdu do toho taky.
Ať to všem tiskne, ahoj
  • 0

juliusvla
 
Příspěvky: 46
Registrován: 10.11.2016 23:42
Bydliště: Plzeň
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod juliusvla » 25.05.2017 14:11

Ahoj, nainstaloval jsem si Repetier V 2.0.0 s Průšovo Slicrem. Všechno v pohodě až na: pokud umístím na podložku více dílů a potom to proženu Průšovo Slicrem, tak se mě umístění na podložce rozhodí až mimo tisknutelnou plochu. Pokud použiju klasickej Clic3r, tak je to v pohodě. Nevíte co dělám špatně?
  • 0

juliusvla
 
Příspěvky: 46
Registrován: 10.11.2016 23:42
Bydliště: Plzeň
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod Gaspadlo » 10.06.2017 19:25

Já zarytě jedu na CuraEnginu... Měl jsem na začátku problémy s jinými slircery a chyběla mi vůle je řešit... Cura mi funguje a na nastavení tisku jsem si již zvykl.
  • 0

Thingiverse - Gaspadlo
SW: Repetier-Host | CuraEngine |SketchUp Make 2017 | MeshLab | MS 3D Builder | SculptGL
Tiskárna: DMS DP2 - 2000cc, 1.75mm PLA, 0.4mm nozzle
Gaspadlo
 
Příspěvky: 9
Registrován: 03.05.2017 09:48
Bydliště: Pardubice
Reputation: 0

Re: Repetier-host V2.0.0

Příspěvekod n1kd0 » 23.06.2017 17:44

nainstaloval jsem nový repetier-host 2.0.1 a nejde mi pouštět tisk z PC. začátek kodu se provede. tiskarna odjede do místa kde má tisknou a zastaví se. musím tisknout z SD karty. zkoušel jsem i přeinstalovávat. ovládat jde tiskárna v pohodě. setkal se s tím někdo?


Kód: Vybrat vše
17:21:38.785 : OpenGL renderer:GeForce GT 630/PCIe/SSE2
17:21:38.785 : Using fast VBOs for rendering is possible
17:21:41.855 : Printer reset detected - initalizing
17:21:41.860 : start
17:21:41.877 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
17:21:44.517 : Free RAM:3741
17:21:44.517 : SelectExtruder:0
17:21:44.971 : FIRMWARE_NAME:Repetier_0.92.9 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
17:21:44.971 : Printed filament:119.79m Printing time:1 days 18 hours 24 min
17:21:44.971 : PrinterMode:FFF
17:21:44.982 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:21:44.983 : DebugLevel:6
17:21:44.983 : SelectExtruder:0
17:21:44.983 : Begin file list
17:21:44.984 : fan_duct_rebelix_v2.gcode 1910172
17:21:44.987 : End file list
17:21:49.295 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:21:49.296 : DebugLevel:6
17:21:49.296 : SelectExtruder:0
17:22:52.532 : X:190.00 Y:0.00 Z:0.000 E:0.0000
17:25:25.129 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:39:40.846 : Tisky vrstvy 1 z 302
17:39:45.946 : Printer reset detected - initalizing
17:39:45.946 : start
17:39:45.967 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
17:39:48.608 : Free RAM:3741
17:39:48.609 : SelectExtruder:0
17:39:49.039 : FIRMWARE_NAME:Repetier_0.92.9 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
17:39:49.039 : Printed filament:119.79m Printing time:1 days 18 hours 24 min
17:39:49.039 : PrinterMode:FFF
17:39:49.041 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:39:49.041 : DebugLevel:6
17:39:49.041 : SelectExtruder:0
17:39:49.042 : Begin file list
17:39:49.042 : fan_duct_rebelix_v2.gcode 1910172
17:39:49.042 : End file list
17:39:49.070 : DebugLevel:6
17:39:49.070 : SelectExtruder:0
17:40:56.993 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:41:14.603 : Tisky vrstvy 1 z 302
17:41:14.625 : Error:set [steps]
17:41:14.625 : Resend:47
17:41:14.655 : Error:set [steps]
17:41:14.656 : Resend:47
17:41:17.838 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:17.855 : Error:set [steps]
17:41:17.855 : Resend:47
17:41:17.885 : Error:set [steps]
17:41:17.885 : Resend:47
17:41:20.909 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:20.925 : Error:set [steps]
17:41:20.925 : Resend:47
17:41:20.956 : Error:set [steps]
17:41:20.956 : Resend:47
17:41:23.979 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:23.996 : Error:set [steps]
17:41:23.996 : Resend:47
17:41:24.027 : Error:set [steps]
17:41:24.027 : Resend:47
17:41:27.050 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:27.065 : Error:set [steps]
17:41:27.065 : Resend:47
17:41:27.098 : Error:set [steps]
17:41:27.098 : Resend:47
17:41:30.120 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:30.136 : Error:set [steps]
17:41:30.136 : Resend:47
17:41:30.169 : Error:set [steps]
17:41:30.169 : Resend:47
17:41:33.192 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:33.207 : Error:set [steps]
17:41:33.207 : Resend:47
17:41:33.240 : Error:set [steps]
17:41:33.240 : Resend:47
17:41:36.262 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:36.279 : Error:set [steps]
17:41:36.279 : Resend:47
17:41:36.310 : Error:set [steps]
17:41:36.310 : Resend:47
17:41:39.333 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:39.349 : Error:set [steps]
17:41:39.349 : Resend:47
17:41:39.381 : Error:set [steps]
17:41:39.381 : Resend:47
17:41:42.403 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:42.420 : Error:set [steps]
17:41:42.420 : Resend:47
17:41:42.451 : Error:set [steps]
17:41:42.451 : Resend:47
17:41:45.475 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:45.490 : Error:set [steps]
17:41:45.490 : Resend:47
17:41:45.522 : Error:set [steps]
17:41:45.522 : Resend:47
17:41:48.546 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:48.560 : Error:set [steps]
17:41:48.561 : Resend:47
17:41:48.594 : Error:set [steps]
17:41:48.594 : Resend:47
17:41:51.615 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:51.631 : Error:set [steps]
17:41:51.632 : Resend:47
17:41:51.665 : Error:set [steps]
17:41:51.665 : Resend:47
17:41:54.686 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:54.703 : Error:set [steps]
17:41:54.703 : Resend:47
17:41:54.734 : Error:set [steps]
17:41:54.734 : Resend:47
17:41:57.757 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:41:57.774 : Error:set [steps]
17:41:57.774 : Resend:47
17:41:57.805 : Error:set [steps]
17:41:57.805 : Resend:47
17:42:00.827 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:00.844 : Error:set [steps]
17:42:00.844 : Resend:47
17:42:00.877 : Error:set [steps]
17:42:00.877 : Resend:47
17:42:03.899 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:03.914 : Error:set [steps]
17:42:03.914 : Resend:47
17:42:03.947 : Error:set [steps]
17:42:03.947 : Resend:47
17:42:06.969 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:06.985 : Error:set [steps]
17:42:06.986 : Resend:47
17:42:07.016 : Error:set [steps]
17:42:07.017 : Resend:47
17:42:10.040 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:10.057 : Error:set [steps]
17:42:10.057 : Resend:47
17:42:10.088 : Error:set [steps]
17:42:10.088 : Resend:47
17:42:13.110 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:13.127 : Error:set [steps]
17:42:13.127 : Resend:47
17:42:13.158 : Error:set [steps]
17:42:13.158 : Resend:47
17:42:16.181 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:16.199 : Error:set [steps]
17:42:16.199 : Resend:47
17:42:16.230 : Error:set [steps]
17:42:16.230 : Resend:47
17:42:19.252 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:19.269 : Error:set [steps]
17:42:19.269 : Resend:47
17:42:19.286 : SD card removed
17:42:19.444 : Error:set [steps]
17:42:19.461 : Resend:47
17:42:22.482 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:22.499 : Error:set [steps]
17:42:22.499 : Resend:47
17:42:22.530 : Error:set [steps]
17:42:22.530 : Resend:47
17:42:25.552 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:25.569 : Error:set [steps]
17:42:25.569 : Resend:47
17:42:25.602 : Error:set [steps]
17:42:25.602 : Resend:47
17:42:28.624 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:28.641 : Error:set [steps]
17:42:28.641 : Resend:47
17:42:28.671 : Error:set [steps]
17:42:28.671 : Resend:47
17:42:31.695 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:31.712 : Error:set [steps]
17:42:31.712 : Resend:47
17:42:31.743 : Error:set [steps]
17:42:31.743 : Resend:47
17:42:34.766 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:34.782 : Error:set [steps]
17:42:34.782 : Resend:47
17:42:34.813 : Error:set [steps]
17:42:34.813 : Resend:47
17:42:37.837 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:37.852 : Error:set [steps]
17:42:37.852 : Resend:47
17:42:37.885 : Error:set [steps]
17:42:37.885 : Resend:47
17:42:40.908 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:40.923 : Error:set [steps]
17:42:40.923 : Resend:47
17:42:40.955 : Error:set [steps]
17:42:40.955 : Resend:47
17:42:43.977 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:43.993 : Error:set [steps]
17:42:43.993 : Resend:47
17:42:44.025 : Error:set [steps]
17:42:44.025 : Resend:47
17:42:47.047 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:47.064 : Error:set [steps]
17:42:47.064 : Resend:47
17:42:47.095 : Error:set [steps]
17:42:47.096 : Resend:47
17:42:50.119 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:50.135 : Error:set [steps]
17:42:50.135 : Resend:47
17:42:50.166 : Error:set [steps]
17:42:50.166 : Resend:47
17:42:53.188 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:53.205 : Error:set [steps]
17:42:53.205 : Resend:47
17:42:53.236 : Error:set [steps]
17:42:53.236 : Resend:47
17:42:56.260 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:56.277 : Error:set [steps]
17:42:56.277 : Resend:47
17:42:56.308 : Error:set [steps]
17:42:56.308 : Resend:47
17:42:59.331 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:42:59.346 : Error:set [steps]
17:42:59.346 : Resend:47
17:42:59.379 : Error:set [steps]
17:42:59.379 : Resend:47
17:43:02.400 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:02.417 : Error:set [steps]
17:43:02.417 : Resend:47
17:43:02.448 : Error:set [steps]
17:43:02.448 : Resend:47
17:43:05.472 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:05.488 : Error:set [steps]
17:43:05.488 : Resend:47
17:43:05.729 : Resend:47
17:43:08.751 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:08.766 : Error:set [steps]
17:43:08.766 : Resend:47
17:43:08.799 : Error:set [steps]
17:43:08.799 : Resend:47
17:43:11.820 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:11.837 : Error:set [steps]
17:43:11.837 : Resend:47
17:43:11.868 : Error:set [steps]
17:43:11.868 : Resend:47
17:43:14.891 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:14.908 : Error:set [steps]
17:43:14.908 : Resend:47
17:43:14.939 : Error:set [steps]
17:43:14.939 : Resend:47
17:43:17.962 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:17.978 : Error:set [steps]
17:43:17.978 : Resend:47
17:43:18.009 : Error:set [steps]
17:43:18.009 : Resend:47
17:43:21.033 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:21.047 : Error:set [steps]
17:43:21.047 : Resend:47
17:43:21.081 : Error:set [steps]
17:43:21.081 : Resend:47
17:43:24.103 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:24.120 : Error:set [steps]
17:43:24.120 : Resend:47
17:43:24.151 : Error:set [steps]
17:43:24.151 : Resend:47
17:43:25.448 : SD card inserted
17:43:27.526 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:27.541 : Error:set [steps]
17:43:27.541 : Resend:47
17:43:27.574 : Error:set [steps]
17:43:27.575 : Resend:47
17:43:30.596 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:30.612 : Error:set [steps]
17:43:30.612 : Resend:47
17:43:30.644 : Error:set [steps]
17:43:30.644 : Resend:47
17:43:33.716 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:33.731 : Error:set [steps]
17:43:33.731 : Resend:47
17:43:33.764 : Error:set [steps]
17:43:33.764 : Resend:47
17:43:36.787 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:36.801 : Error:set [steps]
17:43:36.801 : Resend:47
17:43:36.834 : Error:set [steps]
17:43:36.834 : Resend:47
17:43:39.905 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:39.921 : Error:set [steps]
17:43:39.921 : Resend:47
17:43:39.952 : Error:set [steps]
17:43:39.952 : Resend:47
17:43:43.008 : Warning: Seems like we missed a ok, got a wait - continue sending.
17:43:43.024 : Error:set [steps]
17:43:43.024 : Resend:47
17:43:43.055 : Error:set [steps]
17:43:43.055 : Resend:47
17:43:45.147 : File opened:fan_duct_rebelix_v2.gcode Size:1930209
17:43:45.147 : File selected
17:43:53.429 : X:0.00 Y:0.00 Z:0.000 E:0.0000
17:43:55.141 : Info:Absolute positioning
  • 0

n1kd0
 
Příspěvky: 81
Registrován: 22.04.2015 23:28
Bydliště: Písecko-Strakonicko
Reputation: 0


Zpět na Repetier

Kdo je online

Uživatelé procházející toto fórum: Yahoo [Bot] a 1 návštěvník