Iqos krabička na 9 cigaret

Toto fórum slouží k prezentaci vlastní tvorby, včeně stl, popřípadě i src. Nevkládejte prosím komerční nabídky a ani prezentace tvorby, která není zpřístupněna ostatním zdarna. Děkuji

Iqos krabička na 9 cigaret

Příspěvekod nasranek » 22.05.2019 15:06

Krabička je ze tří části - 2xPLA, 1xFlex.
Proč guma ? S gumou se dá spodní část zasunout do víčka a funguje jako stojánek,
nebylo to původně zamýšlené tak chytrej zas nejsem, ale nechtěla sviňa držet do kupy takže z nouze cnost.
:oops: :oops: :oops:
Moje mejlovka de samozřejmě smazat je to na Vás co si tam vygenerujete, tisknout plným k podložce a potom lehce přejet vrtákem kvůli otřepům.

nahled.stl
(1.77 MiB) Zobrazeno 5476 krát

dno.stl
(826.59 KiB) Zobrazeno 5474 krát

vicko.stl
(910.18 KiB) Zobrazeno 5474 krát

guma.stl
(142.16 KiB) Zobrazeno 5474 krát


Kód: Vybrat vše
$fn=100;
module dno(){
difference (){
union(){
hull(){
translate ([-42,0,-9])cylinder (h=30,d=13,center=true);
translate ([42,0,-9])cylinder (h=30,d=13,center=true);
}
hull(){
translate ([-42,0,-3])cylinder (h=30,d=10,center=true);
translate ([42,0,-3])cylinder (h=30,d=10,center=true);
}}
for (a=[-40:10:40]){
translate ([a,0,0])cylinder (h=45,d=8,center=true);
}
hull (){
translate ([-42,0,25])cylinder (h=45,d=8,center=true);
translate ([42,0,25])cylinder (h=45,d=8,center=true);
}
}
//před generováním smazat********* 5cigaret
/*
for (a=[-40:20:40]){
translate ([a,0,0])cylinder (h=45,d=8,center=true);
}
*/
//před generováním smazat********* 5cigaret
}
module vicko(){
difference (){
     union(){
hull(){
translate ([-42,0,15])cylinder (h=22,d=13,center=true);
translate ([42,0,15])cylinder (h=22,d=13,center=true);
}
hull (){
translate ([-40,0,25]) cylinder (h=2,d=13,center=true);
    translate ([0,0,25])cylinder (h=2,d=16,center=true);
   translate ([40,0,25]) cylinder (h=2,d=13,center=true);
}}
hull (){
translate ([-42,0,14])cylinder (h=22,d=9,center=true);
translate ([42,0,14])cylinder (h=22,d=9,center=true);
}
hull (){
translate ([-42,0,4])cylinder (h=10,d=11,center=true);
translate ([42,0,4])cylinder (h=10,d=11,center=true);
}}}
module guma (){
difference (){
hull(){
translate ([-42,0,11])cylinder (h=30,d=18,center=true);
translate ([42,0,11])cylinder (h=30,d=18,center=true);
}vicko ();
hull(){
translate ([-42,0,11])cylinder (h=32,d=13,center=true);
translate ([42,0,11])cylinder (h=32,d=13,center=true);
}}}
//dno (); vicko ();guma ();
/*difference (){
vicko ();
translate ([-40,-3,25.25])linear_extrude(height=2)
    text("Nasranek@seznam.cz",font="Agency FB:style=Bold",size=8,spacing=1);
}
translate ([0,0,-20])rotate ([0,0,45])dno ();
*/
dno ();
  • 0

nasranek
 
Příspěvky: 268
Images: 0
Registrován: 06.03.2017 01:16
Bydliště: Orlová 4
Reputation: 0

Re: Iqos krabička na 9 cigaret

Příspěvekod nasranek » 02.07.2019 20:15

Tady je spodek bez nápisu
Iqos_krab.stl
cista
(207.71 KiB) Zobrazeno 5385 krát
  • 0

nasranek
 
Příspěvky: 268
Images: 0
Registrován: 06.03.2017 01:16
Bydliště: Orlová 4
Reputation: 0


Zpět na Uživatelská tvorba - FREE

Kdo je online

Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 3 návštevníků

cron