# generated by Slic3r 1.2.9 on Tue Nov 10 20:13:42 2015
bed_temperature = 100
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #FFFFFF
filament_diameter = 1.75
first_layer_bed_temperature = 100
first_layer_temperature = 245
max_fan_speed = 70
min_fan_speed = 35
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 245